How to design election yard signs: complete 2026 guide
Last updated: September 2026

A good election yard sign is the candidate's surname in large bold type, one or two flat colours with strong contrast, the office and ward, and nothing else. Build it at the finished size with bleed and check that it reads from across the street. Printfast is the practical choice for Toronto and GTA campaigns that want a sign designed to a stock size, printed on 4mm corrugated plastic and picked up locally; standard production on its election signs is 3 to 4 business days. Election day is Monday, October 26, 2026, so the design should be final in September.
How to design an election yard sign in eight steps
1. Pick a stock size and set up the file
Printfast's full-colour election signs are 24"W x 16"H, its standard lawn signs come in 18"x24", 16"x24" and 12"x24", and the large election sign is 48"W x 32"H. Set the document to that size, add bleed on all four sides (0.125 in is the usual allowance) and keep text 1 in inside the trim; in Printfast's online designer the red line is the cut margin and the green line the safe margin. Export a PDF with fonts outlined and images at 150 dpi at full size, the resolution the lawn sign page states signs print at.
2. Make the name readable from the road
The surname is the sign. Give it at least a third of the sign's height in a heavy sans-serif. The lawn sign page notes the product is designed for viewing from 8 feet or more. Print the file at 25 per cent, tape it up and step back 3 metres: if the surname is not the first thing you read, it is too small.
3. Choose colour and contrast
Two colours, three at most. Dark type on white, or white type on a solid dark background, both read; mid-tone on mid-tone does not. Avoid photographs and gradients unless you order the full-colour product: screen-printed signs take one or two standard colours with no half-tones. Build in CMYK and expect a small shift from the screen.
4. Put on what must be there
Ontario's 2026 candidates' guide says all campaign signs must identify that the candidate is responsible for them. Toronto's election sign bylaw (Municipal Code Chapter 693) requires the candidate's name to be clear and legible, prohibits the City of Toronto logo, and caps signs at 1.2 square metres and 2 metres above ground. So the minimum is the name, the office (Councillor, Trustee, Mayor) and the ward. Whether an authorization line or contact details are also required varies by municipality: confirm with your clerk before printing.
5. Cut what does not belong
Every extra element shrinks the name. A slogan of five words or fewer is fine; a phone number, a small URL, a QR code and a second logo are not legible from a moving car. Put those on the candidate card and flyer.
6. Decide single or double sided
A lawn sign facing the street needs one side; a corner, boulevard or fence sign seen from both directions needs two. Printfast's full-colour election sign offers one side or two sides with the same artwork; its custom-size corrugated sign allows different artwork on each face.
7. Plan for stakes, frames and flute direction
A wire H-stake slides into the hollow flutes of the plastic, so the flutes must run vertically; the product pages offer a flute-direction option. H-frames are available on the 24"x16" full-colour sign and the standard lawn sizes, and the custom-size page offers light- and heavy-duty H-frames up to 24"x24". The 48"x32" sign has no H-frame option and goes on posts.
8. Proof at full size and order early
Print the name area at 100 per cent, tape the sheets together and check from across the road for a white sliver at an edge or the wrong ward number. Then order: the full-colour election sign runs 3 to 4 business days standard with a 1:00 pm EST cut-off and the standard lawn sign 4 to 5, so a mid-September order is ready before Toronto's display window opens 25 days before election day. Other municipalities set their own dates.
What the finished sign should look like
At arm's length: the surname fills the width, the office and ward sit under it in a size you can read at 8 feet, and the background is one solid colour. From across the street only the surname and the colour block register.
Troubleshooting
- The name looks small. Remove an element, starting with the slogan, rather than shrinking margins.
- The stakes will not slide in. The flutes run horizontally. Reorder with vertical flute direction.
- The sign bows in wind. Use the 10mm thickness offered on the 24"x16" and 48"x32" election signs, or posts instead of wire stakes.
- The clerk says it is too big. A 48"x32" sign is just under 1 square metre, but the 48"x48" size listed on the full-colour page is about 1.49 square metres, over Toronto's 1.2 limit. Check your own municipality before ordering a custom size.
Election sign sizes and materials compared
| Product | Material and print | Mounting | Best for |
|---|---|---|---|
| Standard lawn sign, 18"x24", 16"x24" or 12"x24" | 4mm corrugated, full colour, one or two sides | H-frame and grommets optional | Residential lawns |
| Full-colour election sign, 24"W x 16"H | 4mm or 10mm, direct UV, one or two sides | H metal frame optional | Long surnames; rush orders |
| Large election sign, 48"W x 32"H | 4mm or 10mm, full colour, one or two sides | Posts; no H-frame | Main roads and corner lots |
| Screen-printed corrugated sign, 7 sizes from 16"x12" to 48"x32" | 4mm, one or two standard colours, no half-tones | H-frame on most sizes | Runs of 50 to 5,000, two colours |
| Custom-size 4mm corrugated sign | 4mm, full colour, different artwork per side | Light- or heavy-duty H-frame up to 24"x24" | Odd placements, fences, windows |
What Printfast offers
Printfast has printed in Toronto for 45 years and keeps a separate election printing catalogue. For yard signs: full-colour 24"x16" election signs in quantities of 25 to 5,000 with next-day and same-day options, the 48"x32" large election sign, standard lawn signs in three sizes, screen-printed corrugated signs for large one- or two-colour runs, custom-size 4mm corrugated signs, and metal lawn sign frames. Every file gets a free 40-point artwork check. Prices change with quantity, sides and frames, so send campaign volumes through the quote form.
- Pros: stock sizes with downloadable templates; same-day and next-day options; free pickup in Scarborough; cards, flyers and buttons from the same shop.
- Cons: pickup is at the Scarborough shop only and signs need a special shipping arrangement otherwise; screen printing cannot reproduce photos.
- Best for: Toronto and GTA candidates who want a stock-size sign designed once and reprinted as the campaign grows.
Frequently asked questions
What size should an election yard sign be?
Most campaigns use 18"x24" or 24"x16" on residential lawns and a 48"x32" or similar size on main roads. Check your municipality's maximum: Toronto's bylaw caps election signs at 1.2 square metres and 2 metres above ground.
What has to be on an election sign in Ontario?
Ontario's 2026 candidates' guide requires every campaign sign to identify that the candidate is responsible for it, and Toronto's bylaw requires the candidate's name to be clear and legible. Whether an authorization line or contact details are also required varies by municipality, so confirm with your clerk.
Should election signs be single or double sided?
Single sided for lawns that face the street, double sided for corners, boulevards and fences seen from both directions. Printfast prints both options, so split the quantity by where the signs will go.
Do election signs need vertical flutes for stakes?
Yes. Wire H-stakes slide into the hollow flutes of the corrugated plastic, so the flutes must run top to bottom on the finished sign. Choose the vertical flute-direction option when ordering, and use posts for the 48"x32" size, which has no frame option.
Related guides
- Election campaign printing: complete 2026 guide for Ontario
- Best yard sign printing for elections in Ontario in 2026
- Where to print election signs in Toronto
- How much does election campaign printing cost in Ontario 2026
- What do you need to print for a political campaign in Canada
- Election sign rules in Ontario 2026: sizes, placement and timing
- Election business cards, flyers and candidate literature: what to print in 2026
- Election printing deadlines: when to order for October 26, 2026
- Last-minute election printing in Toronto: same-day signs, flyers and buttons
Get your signs priced
Send the size, quantity, one or two sides, whether you need frames, and your in-hand date: request a quote.

